Table of Contents
Advertisement
"S
" M
ET
41 RESUME
Function: Selects the Scan Resume mode.
Available Values: BUSY / HOLD / 3SEC / 5SEC / 10SEC
Default: BUSY
BUSY:
HOLD:
3SEC/5SEC/10SEC: The scanner will hold for the selected resume time, then resume whether
42 RF SQL
Function: Adjusts the RF Squelch threshold level.
Available Values: S1 - S9 / OFF
Default: OFF
43 RPT
Function: Sets the Repeater Shift direction.
Available Values: –RPT / + RPT / SIMP
Default: SIMP
44 RVRT
Function: Enables/disables the "Priority Channel Revert" feature.
Available Values: ON / OFF
Default: OFF
45 S SRCH
Function: Selects the Smart Search Sweep mode.
Available Values: SINGLE / CNTNUE
Default: SINGLE
SINGLE: The transceiver sweeps the current band once in each direction, starting on the
current frequency. All channels where activity is present (up to 15 in each direc-
tion) are loaded into the Smart Search memories. Whether or not all 31 memo-
ries are filled, the search stops after one sweep in each direction.
CNTNUE: The transceiver makes a sweep in each direction as with the "SINGLE" mode,
but if all 31 channels are not filled after the first sweep, the radio continues
sweeping until they are all filled.
46 SHIFT
Function: Sets the magnitude of the Repeater Shift.
Available Values: 0.00 - 99.95 MHz
Default: 0.60 MHz
78
M
ENU
M
S
ENU
ELECTION
The scanner will hold until the signal disappears, then will resume
when the carrier drops.
The scanner will stop when a signal is received, and will not restart.
or not the other station is still transmitting.
ODE
D
ETAILS
FT-1802M O
M
Hide quick links:
Advertisement
Table of Contents
