Paging Answer Back - Yaesu FT-1802M Operating Manual

CTCSS/DCS/EPCS O
EPCS
Activating the Enhanced Paging & Code Squelch System
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "32 PAGER."
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to
set this Menu item to "ON."
3. Press and hold in the [ MHz ( SET )] key for one second to save the new setting and exit to
normal operation.
4. To disable the Enhanced Paging & Code Squelch, just repeat the above procedure, rotat-
ing the DIAL knob to select "
When the Enhanced Paging & Code Squelch feature is activated, the "P" notation will ap-
pear by the 100 MHz digit of the frequency display.

Paging Answer Back

When you press the PTT switch to respond to a page call, the FT-1802M transmits the
Transmitting CTCSS Tone pair. This tone pair will open the Code Squelch of the calling
station. If you prefer, you can have the FT-1802M respond to page calls automatically
("transpond").
To enable this feature:
1. Press and hold in the [ MHz ( SET )] key for one second, then
rotate the DIAL knob to select "33 PAG.ABK."
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to
set this Menu item to "ON."
3. Press and hold in the [ MHz ( SET )] key for one second to save the new setting and exit to
normal operation.
4. To disable the Paging Answer Back feature, just repeat the above procedure, rotating the
DIAL knob to select "
28
E P
OFF
" in step 2 above.
OFF
" in step 2 above.
PERATION
& C S
FT-1802M O
O
PERATION
M