Advanced Bionics CI-5293 Instructions For Use Manual page 33

Pairing and Connecting the Naída CI M90 to a Bluetooth-Enabled Device
1. Ensure that Bluetooth wireless technology is enabled on your device
(e.g., phone, tablet) and search for Bluetooth-enabled devices in the
connectivity settings menu.
2. Power on the Naída CI M90 sound processor by connecting the sound
processor to a power source. The sound processor will be discoverable
by your Bluetooth-enabled device for up to three minutes, or until it
is successfully paired to a device.
3. Your device should show a list of Bluetooth-enabled devices. Select the sound
processor from the list to pair your sound processor. If you use two Naída CI M90
sound processors, selecting one sound processor for pairing will simultaneously
pair both sound processors. A beep confirms successful pairing.
4. The connection will be maintained as long as the device remains on and
within range.
After your sound processor has been paired to your Bluetooth-enabled device, the
sound processor will automatically connect again when switched on. Your sound
processor can be paired to two Bluetooth-enabled devices at a time. The paired
sound processor can be unpaired from the Bluetooth device by utilizing the Bluetooth
management menu of your device.
31