Advanced Bionics CI-5293 Instructions For Use Manual page 25

The pin does not need to be removed from the sound processor. As long as the tool
is pushed in flush on one side of the sound processor, the pin should be displaced
enough to adequately remove the earhook. Remove the tool from the sound processor.
Gently grasp the earhook at the top near where it connects with the sound processor
and pull forward until it is separated from the sound processor.
Attaching the headpiece cable to the sound processor
To attach the headpiece cable to the sound processor, hold the headpiece cable
by the cable's strain relief. Align the connector on the cable with the connector on the
sound processor and gently push the cable into the sound processor until it snaps
into place.
23