Table of Contents
Advertisement
Note that transcoders only support one input connection. If a given transcoder already has an
input connection, the corresponding field will not be shown.
Transcoder Apply/Cancel Buttons
When the Apply button is clicked, the following actions take place:
• The transcoder configuration takes effect.
• Any connections selected for removal in the Established Connections are deleted.
• Any new transcoder input/output connections are added.
If there are no errors, the transcoder configuration area closes. If any errors are detected, the
configuration area remains open and an error message is displayed by the Apply button. The
possible error messages are:
•
Error: no available transcode
available (check the Admin License Keys Tab). Contact Support if you need to acquire
additional licenses.
If the Cancel button is clicked, all changes are discarded and the transcoder configuration area
closes.
Transcoder Statistics Tab
This tab provides a summary status of all the transcoding sessions. A sample is depicted below.
licenses: there are no more licensed transcoder sessions
56
Advertisement
Table of Contents
