Table of Contents
Advertisement
IP Outputs: Statistics Tab
The Statistics tab for the IP output ports contains a summary of each port status. There are two
sub-tabs: one for Ethernet 1, and another for Ethernet 2. The tab is depicted below:
The indicators can have the following values:
• OK: The IP Output is operating normally (either streaming or ready to stream).
• No Response: The IP Output is configured for unicast operation, but it does not have a
destination MAC address. Dashboard Card State and the Status LED will be red if there
is a connection to this port.
• No Response: The IP Output is configured for unicast operation, and the destination
stopped responding to ARP. The IP Output is using an old cached MAC address.
Dashboard Card State will be yellow if there is a connection to this port.
• Disabled: The IP Output has been disabled (by setting Enable to No).
Ethernet Port 1
Ethernet Port 1
Ethernet Port 1
49
Ethernet Port 2
Ethernet Port 2
Ethernet Port 2
Advertisement
Table of Contents
