Table of Contents
Advertisement
The transcoder configuration parameters are:
• Transcoder Name: all 9990-TRX-MPEG ports have a user-defined name. It can be
configured in this field.
• Transcoder State: use this control to enable (Running) or disable (Stopped) a
transcoder session.
• Video Compression: selects the output compression standard of the transcoding session.
The options are H.264 (MPEG-4 Part 10) or MPEG-2. The 9990-TRX-MPEG only
supports two MPEG-2 sessions. Not all parameters described below are available for
MPEG-2.
• Video Rate Mode: selects between CBR (Constant Bit Rate) and VBR
51
Advertisement
Table of Contents
