Table of Contents
Advertisement
To create an IP Input stream, first select the desired Ethernet port in the Add Stream drop-down
box. Once that selection is made, the IP Input Stream Configuration is displayed, as depicted
below. The configuration screen has three areas:
• Common Parameters: apply to the stream input as a whole, regardless of the
redundancy options.
• Redundancy Control: allows selection of the redundancy mode.
• Addressing Parameters: allow selection of the network stream to be received.
• Established Connections: shows the connections currently established to the port, and
provides the ability to delete individual connections.
• Add Connection Controls: allows the addition of a new connection to the port. This
control is discussed in detail in the Connections section.
33
Advertisement
Table of Contents
