Each of the ASI Port indicators can have the following values:
• TX OK: The port is operating normally in transmit mode (ASI Output).
• TX Overflow: The port is in transmit mode, manual bit rate setting, and the connected
bit rate is excessive. The Dashboard Card State will be red and the Status LED in the
front of the board will also be red. To correct this problem, either externally reduce the
input bit rate, or increase the ASI output bit rate, or configure the port in Automatic
mode.
If this alarm is active, data is being
• TX Unlocked: The port is in transmit mode, automatic bit rate, and there is no data rate
coming to it. Any downstream ASI receivers will lose lock. Dashboard Card State and
the Status LED will be red if there is a connection to this port.
dropped.
31