Front Panel Disassembly; Figure 2.7-1: Remove Pots; Figure 2.7-2: Release The Switches Board From The Panel; Figure 2.7-3: Unlock The Ffc - HHB CDR-882 DualBurn Service Manual

2.7 Front panel disassembly

To disassemble the front panel please follow the instructions below.
1. Remove both the analogue level and AMS pots to the left of the front panel from
their shaft ( Figure 2.7-1).
2. Release the switches board from the front panel (Figure 2.7-2). Take special care
to leave all the buttons in position.
3. Remove the switches board completely by disconnecting the FFC ("A" in Figure
2.7-3).
CDR-882 Service Manual

Figure 2.7-1: Remove pots

Figure 2.7-2: Release the switches board from the panel

Figure 2.7-3: Unlock the FFC

Version 1.3 Page 21 of 37