Front Panel Removal; Figure 2.6-1: 8 Screws That Hold The Panel To The Chassis; Figure 2.6-2: 3 Crews That Hold The Headphones Board - HHB CDR-882 DualBurn Service Manual

2.6 Front panel removal

To remove the front panel from the chassis:
1. Remove eight screws from the inside of the chassis ("A" in Figure 2.6-1).
2. Remove all the screws that hold the headphones and the PS2 boards to the chassis
("B" and "C" in Figure 2.6-2). Also remove the connector from the PS2 board
("D" in Figure 2.6-2).
3. Remove the six screws ("E" in Figure 2.6-3) that also hold the front panel to the
chassis.
CDR-882 Service Manual

Figure 2.6-1: 8 screws that hold the panel to the chassis

Figure 2.6-2: 3 crews that hold the headphones board

Version 1.3 Page 19 of 37