ADJ American DJ H2O LED Setup Instructions

WATER EFFECT PROJECTOR – SETUP INSTRUCTIONS
**Keep all packaging materials. Projector must be returned in same case.**
BASIC SETUP:
1. Plug it in using power cord provided.
2. Press and hold the "Master" button on the
display for 4 seconds to activate the menu
3. Press "Master" button repeatedly until display
shows "Manual Mode." Then press "Enter."
4. Press the Up or Down buttons until display
shows "Color." Then press "Enter."
5. Press the Up or Down buttons to enter the number for your color:
 WATER: 70
 FIRE: 25
6. Then press Enter.
7. Place projector on a table and point at wall.
8. Twist lens to adjust desired level of focus.
YOU'RE DONE!
ADVANCED SETUP:
Choose between 12 different colors OR color-changing mode
1. COLOR CHANGE MODE:
a. Press and hold the "Master" button on the display for 4 seconds then let go
b. Press the "Master" button until display reads "Show Mode" then press "Enter"
c. Use the up or down to switch between 3 different Shows then press "Enter"
d. The light will rotate continuously through 6 different colors.
2. OTHER COLORS:
a. Follow steps 1-5 above and enter the color code from the chart below:
0 - 10 White 11 - 21 White & Orange
44 - 54 Green 55 - 65 Green & Blue
88 - 98 Yellow 99 - 109 Yellow & Purple
SETUP VIDEOS: www.YouTube.com/RentMyWedding PHONE: 1-800-465-8020 WEB: www.RentMyWedding.com
PLEASE HANDLE WITH CARE – PROJECTORS ARE FRAGILE!
Color Chart
22 - 32 Orange
66 - 76 Blue
110 - 120 Purple
Twist to
adjust focus
33 - 43 Orange & Green
77 - 87 Blue & Yellow
121 - 127 Purple & White