Table of Contents
Advertisement
Warranty Restrictions
1.
The warranty may be invalidated if your motorcycle has been neglected, mistreated or modified in its construction, function and/or aesthetics.
2.
If your motorcycle is used in competitive racing or track days, the warranty will be invalidated.
3.
The warranty will be invalidated if the motorcycle is repaired, modified or dismantled, even if only partially, without authorisation from CCM Motorcycles, or
other than by CCM Motorcycles.
4.
If the motorcycle's frame or engine number (stamped into the metal) has been altered or defaced, the warranty will be invalidated.
5.
In order to maintain the manufacturer's warranty, the direction outlined in this manual must be followed at the intervals as recommended in the Scheduled
Maintenance section.
This warranty shall be void if, in CCM's opinion, the motorcycle has been subject to:
1.
Improper use (this includes racing and motor sport).
2.
Improper repair (this includes fitment of non-genuine or "pattern" parts).
3.
Alteration from standard specification in a manner which affects the performance, durability or safety of the motorcycle or any of its component parts.
The warranty may not apply if:
1.
The periodic maintenance and servicing are not carried out at correct intervals.
2.
Evidence of this servicing must be produced, if requested, at the time of any warranty claim.
It is the owner's responsibility to ensure the service record book is kept up to date by the servicing technician. It is advisable to also keep copies of
any service or repair invoices in case the record is lost.
3.
Any problem experienced is not notified to the CCM Services Team within a reasonable time. The owner should take all possible steps to prevent further damage
as soon as any problem is apparent. Such consequential damage may not be covered by this warranty.
4.
In CCM's opinion, components damaged by the effects of corrosion due to inadequate maintenance, aggressive solvent use or the failure to clean on a regular
basis.
5.
Reasonable care has not been taken to keep the machine clean and free from chemical attack by ice clearing agents, cleaning fluids and other corrosive
elements.
48
Advertisement
Table of Contents
