Daikin FWV Series Instructions For Installation, Use And Maintenance Manual page 17

Valves
E2MV**A6 /
E4MV**A6
E2MV2B**A6
E2MVD**A6
E4MVD**A6
E2M2V**A6
E4M2V**A6
2.4 FACTORY MOUNTED KIT VALVES
The kit valves are available in different configurations:
• ON/OFF or MODULATING motor driven 2-way valve (table page 75)
• ON/OFF or MODULATING motor driven 3-way valve (table page 75)
• Pressure indipendent ON/OFF motor driven 2-way valve (refer to
Pressure independent manual FC66006204) p. 75.
connected to the control panel for fan coils, control the room tempera-
ture by stopping the water flow through the heat exchanger.
The kit includes:
• valve
• electrothermal actuator
• plumbing kits for installing the valve on the heat exchanger.
For Kv and hydraulic characteristics of 2, 3 way valves refer to tables page 75.
For other information refer to specific technical manual.
Factory mounted 2 way kit valve
3-way valves, ON/OFF actuator, 230 V
power supply
2-way valve, ON/OFF actuator, 230 V
power supply (main and additional heat
exchanger)
Semplified 3-way valves, ON/OFF actuator,
230 V power supply
3-way valves, ON/OFF actuator, 24 V
power supply
Factory mounted 3 way kit valve
2-way valve, ON/OFF actuator, 24 V
E2M2V***A6
power supply (main and additional heat
exchanger)
3-way valves, modulating actuator, 24 V
E2MPV**A6
E4MPV**A6
power supply
2-way valves, modulating actuator, 24 V
E2MPV***A6
power supply
2-way valves pressure independent, actu-
PIC2V
ator ON/OFF, 230V power supply, hydronic
kit, main and additional coil
4PW17548-7
17