Manual 2-Sided Printing - Xerox Phaser 6250 Manuallines

Setting the Printer Driver for 2-Sided Printing (Continued)
Operating System
Mac OS 9
Mac OS X, version
10.1 (and higher)

Manual 2-Sided Printing

Guidelines
If the printer does not have automatic 2-sided printing capability, or you want to print on a
paper type that cannot be automatically printed on two sides, print manually on both sides of
the paper by following the procedures in this section.
■ Use any tray for manual 2-sided printing.
■ For best opacity and feed reliability, use Plain Paper that is 90 g/m
heavier paper.
■ Increase the top margin on side 1 to at least 12 mm (0.48 in.).
■ You must print all the odd-numbered pages first. Reinsert the printed pages in the same
tray from which the odd-numbered pages were taken, then print the even-numbered pages.
■ Do not use heavy toner coverage on side 1 of a manual 2-sided print job.
■ 2-sided printing on specialty paper can shorten the life of printer components.
Print quality may be degraded on the second side of manual 2-sided printing jobs. For best
results, follow the prompt on the front panel to perform manual 2-sided printing (duplex
printing).
Steps
1. Select File, then select Print.
2. Select Layout.
3. Select Print on Both Sides.
4. Click the Binding icon that matches the edge to bind.
1. Select File, then select Print.
2. Select Duplex.
3. Select Print on Both Sides.
4. Click the Binding icon that matches the edge to bind.
Phaser® 6250 Color Laser Printer
2-29
2-Sided Printing
2
(24 lb. Bond) or