Manual 2-Sided Printing; Paper Specifics - Xerox 7300DX - Phaser Color Laser Printer Specification

Setting the printer driver for two-sided printing
Macintosh
LaserWriter 8.6
or
LaserWriter 8.7
Windows 95,
Windows 98, or
Windows Me
Windows 2000
or
Windows XP
Windows NT

Manual 2-sided printing

If the printer doesn't have a duplex unit, you can still have the printer print on both sides of the paper.
However, you must have the printer print all of the odd-numbered pages first, reinsert the printed pages
in the tray, then have the printer print the even-numbered pages.
You can use Trays 1 - 5 or the Multi-Purpose Tray for manual 2-sided printing.

Paper specifics

For the best opacity and feed reliability, use Plain Paper that is 90 g/m
I
2-sided printing on specialty paper can shorten the life of printer components.
I
For best results, do not use heavy toner coverage on side 1 of a manual 2-sided print. Increase the
I
top margin on side 1 to at least 12 mm (0.48 in.).
Print quality may be degraded on the second side of manual 2-sided prints for weights ranging
I
2
from 105-203 g/m (>28-75 lb. bond, 58-112 lb. index).
Phaser® 7300 Color Printer
1. From the File menu, select Print, and then select Layout.
2. Select Print on Both Sides.
3. Select a binding preference.
1. From the File menu, select Print.
2. Click the Properties button.
3. On the Setup tab, select Print on 2 Sides.
4. Check or uncheck Bind on Top Edge.
1. From the File menu, select Print.
2.
Click the Properties button.
3. On the Layout tab for Print on Both Sides (Duplex), select either
Flip on Long Edge or Flip on Short Edge.
1.
From the File menu, select Print.
2.
Click the Properties button.
3.
On the Page Setup tab for Print on Both Sides (Duplex Printing),
select either Long Edge or Short Edge.
Specialty Printing
2
(24 lb. bond) paper.
14