Advertisement
Quick Links
ASSEMBLY APP AVAILABLE ON
We highly recommend downloading the Absco Sheds
Assembly App to assist with your build.
STEP BY STEP ASSEMBLY VIDEOS • PARTS CHECKLISTS • FAQ • 7 DAY
CUSTOMER SERVICE • WARRANTY INFORMATION • COUNCIL FORMS
4"
When laying a concrete slab for your shed, it is
best practise to have a rebated edge to prevent
water ingress.
Rebated section is 1" high and inset 3" on all sides
from the overall slab base dimensions
AU: 1800 029 701
+1 (866) 788 3046
+1 (866) 788 3046
N Z: 0800 466 444
Absco Industries
ABSCO PREMIER SHED
MODEL: 23231GK-PTX
7' W x 7' D x 6.5' H
admin@absco.com.au
admin@absco.com.au
www.abscogardensheds.com
www.abscosheds.com.au
Assembly Instruction Manual
Scan to
download
WALLS SIT
ON THIS LEVEL
RAISED FLOOR
INSIDE SHED
4"
3"
1"
PLEASE LEAVE A REVIEW
www.abscosheds.com.au/review
Model: 23231GK-PTX
Australian Made
+
Overall slab base
dimensions for this
model are as shown
3"
Illustration not to
11/7/23
1.3
above.
scale.
1
Advertisement
Related Manuals for ABSCO SHEDS 23231GK-PTX
Summary of Contents for ABSCO SHEDS 23231GK-PTX
- Page 1 MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made ASSEMBLY APP AVAILABLE ON We highly recommend downloading the Absco Sheds Scan to download Assembly App to assist with your build. STEP BY STEP ASSEMBLY VIDEOS • PARTS CHECKLISTS • FAQ • 7 DAY CUSTOMER SERVICE •...
-
Page 2: General Instructions
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made GENERAL INSTRUCTIONS SAFETY NOTES • Before commencing any assembly, read • Some parts may have sharp edges. It is through these instructions in detail to gain... - Page 3 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made COMPONENT PACKING LIST DESCRIPTION PART # DESCRIPTION PART # STEEL SHEET STEEL SHEET 70.3” x 30.4” 77.9” x 30.4” STEEL SHEET STEEL SHEET 70.3” x 30.4”...
- Page 4 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made COMPONENT PACKING LIST DESCRIPTION PART # DESCRIPTION PART # CHANNEL CHANNEL 54AL 54AR 44.3” 44.3” CHANNEL CHANNEL 54CL 54CR 44.3” 44.3” CHANNEL CHANNEL 54BL 54BR 44.3”...
- Page 5 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.
- Page 6 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made Guide on Joining Spliced Channels The text marked on all parts must be shown on the same side as each other JOIN>> JOIN>> <<JOIN JOIN>>...
- Page 7 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made PRE-ASSEMBLY OF SPLICED CHANNELS Join together 20 x channel sections using 10 x channel joiners (Part CSJ) NOTE: Some channels may have holes in them - You will need to redrill holes where CSJ joining channel covers them.
- Page 8 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made Guide on Joining a Spliced Ridge Beam If present, remove plastic coating from top side of ridge beam capping before assembly. Follow these three steps to assemble a ridge beam.
- Page 9 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made PRE-ASSEMBLY OF SPLICED RIDGE BEAM ZARSP = 1x 97B 1x 97BL 1x 97BR Absco Industries Assembly Instruction Manual Model: 23231GK-PTX 11/7/23...
- Page 10 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made OVERVIEW OF ROOF COMPONENTS Absco Industries Assembly Instruction Manual Model: 23231GK-PTX 11/7/23...
- Page 11 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made OVERVIEW OF WALL COMPONENTS Absco Industries Assembly Instruction Manual Model: 23231GK-PTX 11/7/23...
-
Page 12: Rear Panel Assembly
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made REAR PANEL ASSEMBLY 1x required. Absco Industries Assembly Instruction Manual Model: 23231GK-PTX 11/7/23... - Page 13 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made ROOF PANEL ASSEMBLY 2x required. Fit 81C to edge of sheet with pre- punched holes. Absco Industries Assembly Instruction Manual Model: 23231GK-PTX 11/7/23...
-
Page 14: Side Panel Assembly
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made SIDE PANEL ASSEMBLY 2x required. Absco Industries Assembly Instruction Manual Model: 23231GK-PTX 11/7/23... -
Page 15: Front Panel Assembly
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made FRONT PANEL ASSEMBLY 1x required. Absco Industries Assembly Instruction Manual Model: 23231GK-PTX 11/7/23... - Page 16 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made DOOR PANEL ASSEMBLY SINGLE DOOR 1x required. Vertical door channels are installed in the opposite orientation compared to the horizontal door channels. Long Short fl ange...
- Page 17 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made DOOR PANEL ASSEMBLY SINGLE DOOR PANEL NOTE: Nuts and bolts are also supplied and may be used instead of 1/4” rivets. Use a 4mm drill bit to enlarge...
- Page 18 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made PANEL CONSTRUCTION NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel are pre-punched for attaching roof sheeting. The base channels are not pre- punched.
- Page 19 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made INSIDE VIEW OF FIXING Secure peak brace to Move the other roof ridge beam and roof panel into position and panel with one screw at...
- Page 20 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made FINAL CONSTRUCTION Bend the top and bottom flanges as shown, then hook the bottom flanges under the top channel and screw top to the ridge beam with two screws.
- Page 21 ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made REINFORCING ROOF INSTALL ADDITIONAL SCREWS ALONG THE UNDERSIDE OF THE RIDGE BEAM, CENTERED IN EVERY SECOND PAN OF THE ROOF SHEETING AS PICTURED. THESE POSITIONS DO NOT HAVE PRE-PUNCHED HOLES SO USE THE SUPPLIED DRILL BIT TO PREDRILL HOLES THROUGH THE RIDGE BEAM, THE ROOF PANEL CHANNEL INSIDE IT AND THE ROOF SHEET.
- Page 22 THE CUSTOMER SERVICE MANAGER, ABSCO SHEDS, PO BOX 119 ACACIA RIDGE QLD AUSTRALIA 4110 PHONE: +61 1800 029701 EMAIL: warranty@absco.com.au...
Need help?
Do you have a question about the 23231GK-PTX and is the answer not in the manual?
Questions and answers