Changing The Fuse In The 12 V Dc Universal Plug; Storage - Dometic Adventuridge KB2015 User Manual

Changing the fuse in the 12 V DC universal plug
Tip:
Only use the same type of fuse (F5L250V) in the 12 V DC univer-
sal plug. Damages to devices caused by inserting the wrong
fuses are not covered by any warranty or replacement service.
5
A fuse for protecting the cooler is located in the 12 V DC universal plug
(see fig. B). Two fuses are contained in the product contents of the cooler as
a replacement. If the fuse is defective, change it as follows:
1. Screw the cap
2. Carefully take the fuse
Make sure that you do not remove the contact tip of the 12 V DC universal
7
plug .
3. Carefully insert a new fuse in the plug housing.
4. Screw the cap onto the plug housing in a clockwise direction.
Make sure that the contact tip is in the cap.
The 12 V DC universal plug is operational.

Storage

NOTICE!
Risk of mould!
Improper storage of the cooler may cause the cooler to mold.
− Always store the cooler in a dry, well ventilated area.
− Always store the cooler with the unit cover opened.
If you do not use the cooler for a prolonged period, proceed as follows:
1. Before you store it, clean the cooler as described in the chapter "Cleaning".
2. Let the cooler and all parts dry completely before you store them.
3. Open the unit cover
4. Store the cooler in a dry, well ventilated area.
AFTER SALES SUPPORT
1 800 544 4881
USA
6
off of the plug housing
5
out.
1
(see fig. C).
4
in a counterclockwise direction.
customersupportcenter@dometicusa.com
USA
Storage
19