Energy State - LG HM121HF UB60 Installation Manual

Energy State

This product provides energy states that enable customers to use as much as possible of their
own renewable energy. It can shift setpoints depending on input signal from Energy Storage
System (ESS) or from any other third-party device using Modbus RTU or Digital 230V inputs.
Available Energy States
There are 8 energy states available. 4 fixed and 4 customizable - each with the possibility to
enhance self-consumption of renewable energy.
Battery
Energy
Command State of
state
charge
Operation Off
1
(Utility lock)
Normal
2 Normal
Operation
Operation On
3
Recommend
Operation On
4 Very High
Recommend
Operation On
5 Very High
Commend
Operation On
6
Recommend
Operation
7
Save
Operation
8
Super Save
Heating
Setting Range
Forced
Low internal Fixed
operation off
Maintain
operation Fixed
status
Increase 2 °C
High from target Fixed
temperature
Maintain
operation Fixed
status
Increase from
0/+30
target
(Default : +5)
temperature
Increase from
0/+30
High target
(Default : +2)
temperature
Decrease from
Low target
(Default : -2)
temperature
Decrease from
Very
target
Low
(Default : -5)
temperature
ACCESSORIES INSTALLATION
Operation (standard setting)
Cooling
Setting
Forced internal
operation off
Maintain
operation status
Maintain
operation Status
Maintain
operation status
Decrease from
target
(Default : -5)
temperature
Decrease from
target
(Default : -2)
temperature
Increase from
0/-30
target
(Default : +2)
temperature
Increase from
0/-30
target
(Default : +5)
temperature
Domestic Hot Water
Range Setting
Forced internal
Fixed
operation off
Maintain
Fixed
operation status
Increase 5 °C
Fixed from target
temperature
DHW Target
Fixed
80 °C
Increase from
0/-30
target
temperature
Increase from
0/-30
target
temperature
Decrease from
0/+30
Target
Temperature
Decrease from
0/+30
Target
Temperature
97
Range
Fixed
Fixed
Fixed
Fixed
0/+50
(Default : +30)
0/+50
(Default : +10)
0/-50
(Default : 0)
0/-50
(Default : 0)