Override Remote Changes - heat-timer HWRQ Platinum Installation And Operation Manual

OVERRIDE REMOTE CHANGES

(Requires RINet Package)
• W ith Internet communication, any setting that is changed remotely will automatically
be set to override. An overridden setting will have a star next to its value on the
control display. In addition, it will not be modifiable unless the password is entered.
• I nternet controls offers the capability of taking a specific value out of its override
status. Just go to the ICMS System Override webpage and click the button to the right
of that setting.
• T o take all settings out of override, go the ICMS System Overrides webpage and
select "Remove all Overrides" button.
• T o allow an Internet communication control overridden values to be adjusted locally,
the Panel Password Mode under the Maintenance live session must be set to either
"Only Overrides Require Password" or "All Changes Require Password". This will
allow a control user with the proper password to make changes to overridden settings.
• A ll BACnet IP communication controls provide access to change their override values
locally when the password is entered.
List of HWRQ Platinum Overrides
HWRQ Platinum Installation and Operation Manual
WARNING
Any setting that is changed
remotely will automatically be
set to override An overridden
setting is not adjustable unless
"ONLY OVERRIDES REQUIRES
PASSWORD" or "ALL CHANGES
REQUIRE PASSWORD" has
been selected from the Internet
Maintenance screen
37