3
Making Copies
Darken/Lighten button
Press this button to select the Darken/Lighten function, which lets you set
the overall copy lightness level. Press the value ( + and - ) buttons to select
among the following values: Lightest, Light, Normal, Dark, and Darkest.
# of Copies button
Press this button to select the # of Copies function. By pressing the value
( + and - ) buttons or by entering numbers using the keypad buttons, you can
specify that the printer make up to 999 copies. After the first copy is made
and transferred to the printer, subsequent copies are printed at the printer's
rated speed.
Tray Selection button
Press this button to select the Tray Selection function. Depending on the
type of printer connected to the CopyStation, pressing the value ( + and - )
buttons may select among the following printer tray options: Upper tray,
Middle tray, Lower tray, or Manual Feed.
Numeric-entry keypad
For copy functions such as # of Copies and Scale, you can use the numeric
keypad instead of the value ( + and - ) buttons to enter exact values.
If you enter a number that is out of the function's range of acceptable values,
a corresponding error message appears on the display. You can correct the
error by pressing the red Cancel button to delete the entry.
Copy (green) button
In normal operation, press the Copy button to start the copying process.
(To stop copying once it has started, press the red Cancel button.)
When you are entering Special Functions values, press the Copy button to
make the CopyStation accept new values into memory.
3-6
Phaser CopyStation