Advertisement
Specifications
Dimensions
Weight
Power Consumption
Backup Battery
Siren Current
Flash Current
Timers
Tamper Trigger
Operating Environment
Material
Case Protection
LED Light Indicator
This siren features LED light indicators for easy status confirmation that count from the
8-pin terminal connector, as follows:
• Power Cut: LED 2 flashes twice, then pauses for 1 second. Siren will sound.
• Standby Mode: Both LEDs flash alternately.
• No Backup Battery PSU: LED 2 flashes.
• Siren Trigger: Both LEDs and the Light flash continuously.
Tamper Switch
The factory default is INT (interior trigger)
• INT Mode: Tamper will trigger alarm directly.
• EXT Mode: Tamper will trigger panel first.
SAB/SCB Selection
The factory default is SAB.
• SAB Mode: Control panel will power the buzzer.
• SCB Mode: Backup battery will power the buzzer.
300 x 220 x 65mm
1kg
20mA @ 12VDC
7.2V 500mA rechargeable
220mA @ 12VDC
180mA @ 12VDC
5sec. (Test) / 3min. / 20min.
Interior/Exterior
-25° to 70°C
Polycarbonate
UV protection
Advertisement
