Advertisement
Quick Links
Watchguard™ Wireless Siren & Strobe
Installation Manual
Model: WGSIR-500W
This wireless outdoor siren is a cost-effective outdoor sounder. It features a waterproof, UV
resistant & anti-corrosive design with low battery consumption. With the NimH battery, it
can last up to 3 days with AC power cut off.
Product Features
• Easily connect the wireless transmitter at up to 100m range
• Loud siren sound with high-visibility strobe flashes
• Dual tamper switch protection for outer casing & wall mount removal
• Internal 7.2V rechargeable backup battery
Advertisement
Related Manuals for Watchguard WGSIR-500W
Summary of Contents for Watchguard WGSIR-500W
- Page 1 Watchguard™ Wireless Siren & Strobe Installation Manual Model: WGSIR-500W This wireless outdoor siren is a cost-effective outdoor sounder. It features a waterproof, UV resistant & anti-corrosive design with low battery consumption. With the NimH battery, it can last up to 3 days with AC power cut off.
- Page 2 Specifications Dimensions 300 x 220 x 65mm Weight Power Consumption 30mA @ 12VDC Voltage Range 9~15VDC Backup Battery 7.2V 500mA rechargeable Siren Current 200mA @ 12VDC Siren Volume 105±3dB at 1m Flash Speed 60/min Flash Current 120mA @ 12VDC Wireless Signal 315MHz / 433MHz / 868MHz Timers 5sec.
- Page 3 Transmitter Code Learning 1. Connect the transmitter to the green port - RED wire to + (pos.) and WHITE wire to – (neg.) 2. Power the siren unit by connecting the battery. The LEDs will turn on if done correctly. 3.
- Page 4 Cut Off Siren Duration The red 2-pin DIP switch on the siren adjust alarm time. 1. The top diagram (top circle) shows what to set the DIP switches to for the desired siren duration. Refer to the table below for a more detailed description: Siren Duration DIP Switch 1 (A) DIP Switch 2 (B) 15 Minutes...