Setting Numerical Values - Miele PDR 914 SOM Operating And Installation Instructions

The orange scroll bar in the bottom display area shows that there are further options to
choose from.
To select the required drying programme, touch the programme name with your finger.

The display will now change to the standard menu for that programme.
"Extras" menu (multiple selection)
 Extras

Gentle tumble

Anti-crease
To select one or more Extras, touch the required Extras with your finger.
Currently selected Extras are marked orange. To deselect an Extra simply touch the Extra
again.

Setting numerical values

You can set numerical values in some menus. You can set the numerical values by swiping
your finger up and down on the display.
Clock display
14 02

13 01
12 00
11 59
10 58
Place your finger on the number that you want to change.

To set the required number, swipe your finger up or down on the display.

Confirm the set numerical value by touching the OK sensor control.

Tip: For some settings, depending on the value range and increments, the value can also be
set using a numerical keypad. Briefly touching the numbers will bring up the numerical
keypad. Once a valid number has been entered, the OK sensor control will be highlighted
green.
 Clock display
14 02
13 01
12 00
11 59
10 58
Briefly touch a number between the two lines with your finger.

The numeric block will appear.
en - Operating the tumble dryer
11:02
OK
OK
OK
65