2-4-3
Using the Tabs on the RCP
Tab
Total View
(See individual
(Shows all
Printer, Page Setup,
the printer
Font Setup, Quality
parameters
and Test tabs, below)
available in
the RCP.)
Printer
Emulation
Printer Timeout
Power Save
Paper Jam Recovery
Page Setup
Paper Size
Lines Per Page
Copies
Orientation
Font Setup
Symbol Set
Pitch
Typeface
Point Size
Parameters
(See below)
Shows current emulation. It is always PCL 5e.
Tells the printer how long to wait after data is printed
before accepting data via the other interface. The
default value is 15 seconds.
Puts the printer into Power Save mode when it is
powered ON but is idle for a length of time. Select your
desired time length. The default value is 30 minutes. In
Power Save mode, the power consumption is under
18 watts.
If this box is checked, the printer will recover pages
from the print job when paper is jammed in the printer.
Sets the default size of the image that will print on
paper and envelope.
Sets the number of lines on the page.
Sets the number of copies.
Determines the orientation of the image on the page.
Symbol set is a unique grouping of all available
characters in a font.
This menu is available only when you select a fixed
pitch outline font. It is ignored for other fonts.
It shows the typeface of the current font.
This menu is available only when you select a
proportionally spaced outline font. It is ignored for
other font.
Description
Printing • 27