Cleaning The Printer; Cleaning The Outside; Cleaning The Inside - Xerox DocuPrint P8E User Manual

4-1
4-1-1

Cleaning the Outside

4-1-2

Cleaning the Inside

1
2
3
4
40 • Chapter 4

Cleaning the Printer

Do not use ammonia-based sprays or volatile solvents such as thinner to
clean the printer, as these can damage the printer surface.
Always unplug the power cord before cleaning any part of the
printer.
Clean the outside surfaces of the printer by wiping them with a soft, clean,
lint-free cloth.
Keep the front cover closed when cleaning the outside of the printer.
You can dampen the cloth slightly with water, but be careful not to let any water
drip onto the printer or inside it.
When paper jams occur, unfused toner on the paper can fall off the paper and
build up inside the printer.
Unplug the power cord.
Remove the image cartridge (refer to "Replacing the Image
Cartridge" on page 41).
Use a soft cloth to wipe away any dust and spilled toner from the
image cartridge.
You can dampen the cloth slightly with water, but be careful not to let any water
drip onto the printer or inside it.
Reinsert the image cartridge.