Table of Contents
Advertisement
Problem
Missing characters
Back of printout dirty
Incorrect fonts
Faded graphics
Possible Cause
The paper may be too damp.
The transfer roller may be dirty.
TrueType fonts may be disabled
(Windows 3.1x).
Toner may be low.
Remedy
Try printing with a different batch
of paper. Do not open packages
of paper until necessary so that
the paper does not absorb too
much moisture from the air.
Print a few blank pages to clean
the transfer roller.
Use the Fonts dialog box in the
Control Panel to enable TrueType
fonts.
Remove the image cartridge and
shake it gently to evenly distribute
the toner. Then replace the image
cartridge. Have a spare image
cartridge in preparation for the
toner running out.
Troubleshooting • 37
Advertisement
Table of Contents
