Table of Contents
Advertisement
Electrical Safety
Always follow a code of safe habits starting with the following:
1. Use only the power cord supplied with your Xerox DocuPrint P8e.
2. Do not use a ground adapter plug to connect the Xerox DocuPrint P8e
to a power source receptacle that lacks a ground connection terminal.
3. Plug the power cable directly into a properly grounded electrical outlet.
Do not use an extension cord. If you are not sure whether or not an
outlet is properly grounded, consult an electrician.
WARNING
You might receive a severe electrical shock if you do
not connect the grounding conductors properly.
4. Do not place the Xerox DocuPrint P8e where people might step or trip
on the power cable.
5. Do not place objects on the power cable.
6. Do not override or disable electrical or mechanical interlocks.
7. Do not obstruct ventilation openings. These openings are provided to
prevent overheating of the machine.
WARNING
Do not push objects into slots and openings on the
Xerox DocuPrint P8e. Contacting a voltage point or
shorting out a part might result in electrical shock or
fire.
8. If any of the following conditions occur, turn off the Xerox DocuPrint
P8e power immediately. Disconnect the power cable from the
electrical outlet. Contact an authorized Xerox Service Representative
to correct the problem:
-
The Xerox DocuPrint P8e emits unusual odors, or makes unusual
noises.
-
The power cable is damaged or frayed.
-
Liquid is spilled into the Xerox DocuPrint P8e.
-
Any part of the Xerox DocuPrint P8e is damaged.
-
The Xerox DocuPrint P8e is exposed to water.
Disconnect Device
The power cord is the disconnect device for the Xerox DocuPrint P8e. It is
attached to the back of the machine as a plug-in device. To remove all
electrical power from the Xerox DocuPrint P8e, disconnect the power cord
from the power receptacle.
v
Advertisement
Table of Contents
