Specifications - Roksan Audio Caspian Set Up Manual And Product Manual

S P E C I F I C A T I O N S
INPUTS
Input 1 (Balanced): 1 x pair XLR sockets
Input 2 (Single ended): 1 x pair RCA sockets
Input Impedance: 38 kΩ
Input Sensitivity: 240 mV RMS
Signal Input L+R Channels: Balanced and single ended
Signal Output Chain Output L+R channels: Balanced and single ended
OUTPUTS
Output 1: 1 x pair RCA sockets
Output 2: 1 x pair XLR 3 pin plugs
Output Voltage: 700 mV
Output Power: 85 Watts in to 8 Ω both channels driven
125 Watts in to 4 Ω both channels driven
Output Current: 60 A peak to peak
Damping Factor: 160 measured at 8 Ω
Frequency Response: -3 dB, <3 Hz. > 100 kHz
Gain: 31.6 dB straight or untrimmed 0.316 untrimmed to fully trimmed
Harmonic Distortion: <0.005% 1kHz into – 8 Ohm
Signal to Noise Ratio: Line 100 dBA (ref 900 mV)
POWER SUPPLY
Power Supply: 350 VA Ultra low noise toroidal transformer
Power Source: 100 - 120 V, 50/60 Hz
220 - 240 V, 50/60 Hz
Power Consumption: Full power 2 channels 8 Ohm <330 W, 4 Ohm <550 W
Dimensions (W x D x H): 432 x 330 x 70 mm
Weight: 13 Kg
All specifications are liable to change without notice. E&OE
432 x 330 x 80 mm (Including feet)
Caspian Stereo Power Amplifier 11