Establishing The Correct Disk Striping Procedure; Striping Dynamic Disks - Xerox DocuColor 8000 Software Installation Manual

16
The Computer Management window appears.
Maximize the window.
2.

Establishing the Correct Disk Striping Procedure

In the Computer Management window, verify that Disks 1, 2 and 3 are labelled
1.
. Perform the procedure: Striping Dynamic Disks.
Dynamic
If you have replaced a disk or low-level formatted any disk, low-level format all
2.
the image disks (a required procedure, see Appendix B, Formatting the External
Device on page 45); the disks will all be labelled
Perform the procedure: Striping Unknown Disks on page 18.

Striping Dynamic Disks

Position the mouse pointer in the area where the disk is designated
1.
Spire CXP8000 Color Server 1.0 Software Installation Guide
Unknown
.
.
Dynamic