Xerox DocuColor 8000 Software Installation Manual page 12

8
When the
3. PC DOS Start Up
•
Creo Software Complete Overwrite Installation
•
Creo Software Preservation Installation (System Partition Overwrite)
•
Backup Creo System Partition
•
Restore Creo System Partition
•
DOS prompt
Use the keyboard arrows to select
4.
Press .
5.
ENTER
The system takes about one minute to respond, and then the following
message appears.
The restore process is irreversible and overwrites all
information on the system partition.
To save job and other resource information use the
Backup_Joblist.bat script.
Continue and restore system partition??
Yes/No
If you press (No), the following message appears.
6.
N
Please remove the CD-ROM and floppy from the drive and press
+ + to reboot the computer.
CTRL ALT DELETE
Backup the job list database, see Backing Up the Job List Database on
a.
page 5.
Return to step 2 and repeat the procedure.
b.
If you press (Yes), the Norton Ghost window appears, and the files on
7.
Y
partition D are restored to partition C.
When the process is complete, the following message appears.
8.
Please remove the CD-ROM and floppy from the drive and press
+ + to reboot the computer.
CTRL ALT DELETE
Remove the CD from the DVD-ROM drive, and press
9.
restart.
You have completed Restoring the Creo System Partition.
Note: Before performing the restore procedure—if the job list database was not
backed up or cannot be restored, you must format the image disks. See Appendix
A, Formatting the Image Disk on page 43.
Spire CXP8000 Color Server 1.0 Software Installation Guide
menu appears, the following options are available:
Restore Creo System Partition
.
+ + to
CTRL ALT DELETE