Using The Tuner And Metronome At The Same Time - Korg TM-70T Owner's Manual

Setting the tempo via tap tempo
You can set the tempo by tapping it out.
1.
While the metronome is on, press the
several times at regular intervals.
The metronome detects the BPM according to the
interval at which you press the button, and sets the
tempo accordingly. Also, the display indicates the
tempo as a number.
While the tempo is being detected,
four curved lines appear on the display
around the
tempo value.
• When the detected BPM is less than 30, "Lo" appears
on the display, and the tempo is set to "30".
• When the detected BPM exceeds 252, "Hi" appears on
the display, and the tempo is set to "252".
2.
Press the
The metronome pendulum swings from left to right
in time with the tempo, and the
the tempo.
You can also input the tap tempo while using the
metronome.
3.
To stop the metronome, press the
Using the tuner and metronome at
the same time
The TM-70T/TM-70C lets you use the tuner and metro-
nome simultaneously.
Press the
turn the tuner and metronome on. The meter on the
display is shown in two levels as shown below.
Metronome pendulum
For more on using the tuner and metronome, refer to
"Using the tuner" (p. 3) and "Using the metronome"
(p. 6).
When using the tuner and metronome simultane-
ously, you can't select
center beats),
the center beat) or
icon to the left of the
button to start the metronome.
and
For tuner
(quadruplet),
(triplets) as the beat.
7
button blinks with
buttons respectively to
(quadruplet without the
(triplets without
2, 3
1
button
button.