Preparing The Printer For Shipment - Xerox Phaser 8560 User Manual

Preparing the Printer for Shipment

Before shipping the printer:
1. Remove the maintenance kit and waste tray. See
Waste Tray on page 5-20.
2. Turn off the printer. See
3.
Pack the printer. See
Repack the printer using the original packing material and boxes or a Xerox repackaging kit.
Additional instructions for repacking the printer are provided in the repackaging kit. If you do
not have all the original packaging, or are unable to repackage the printer, contact your local
Xerox service representative.
Caution:
Damage to the printer resulting from improper moving or failure to repackage the
printer properly for shipment, is not covered by the warranty, service agreement, or Total
Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and
Canada. Coverage may vary outside these areas; please contact your local representative for
details.
Turning Off the Printer
Packing the Printer on page 5-24.
Phaser® 8560 Color Printer
5-19
Moving and Repacking the Printer
Removing the Maintenance Kit and
on page 5-22.