Xerox Phaser 8560 User Manual page 155

choosing a network connection, 2-3
configuring the network address, 2-5
connection, 2-3
Ethernet, 2-3
creating a Local Area Network
(LAN), 2-5
manually setting IP address, 2-7
mask, 2-6
setup and configuration, 2-2
TCP/IP and IP addresses, 2-5
O
Office Color color correction, 4-4
Online Support Assistant, 1-10
operating systems
printer drivers, 2-9
operational safety, A-3
options
additional trays, 1-5
internal hard drive, 1-5
memory, 1-5
printing, 3-21
ordering supplies, 5-15
P
packing the printer, 5-24
PANTONE colors, 4-11
paper
2nd side, 3-27
card stock, 3-16
custom sizes, 3-55, 3-59
cutouts or perforations, 3-4
damaging to the printer, 3-4
duradocument, 3-16
envelopes, 3-16, 3-36
glossy, 3-49
guidelines for printing glossy paper, 3-49
jams, 6-2
labels, 3-16, 3-43
letterhead, 3-16
loading in the paper trays, 3-9
manual feed, 3-15
margins, 3-6, 3-8, 3-55
Paper Tips page, 3-5, 4-7, 4-10
photocopied, 3-4
porous, 3-4
pre-printed, 3-16, 3-27
pre-punched hole in center or edge, 3-4
printing on specialty media, 3-16, 3-29
stapled, 3-4
storage guidelines, 3-5
supported, 3-3, 3-5, 3-6
supported sizes and weights, 3-5
transparencies, 3-16, 3-29
tray capacity, 3-9, 3-16
trifold brochures, 3-16
types, 3-3
creating custom types, 3-59
usage guidelines, 3-4
paper release blades
cleaning, 5-10
Paper Tips page, 4-10
parts of the printer, 1-2
PCL fonts, 1-4
perchlorate, A-7
perforations, 3-4
PhaserSMART, 1-10, 6-19
technical support, 6-18
photocopied paper, 3-4
plain paper, 3-9
porous paper, 3-4
PostScript fonts, 1-4
power cord connection, 1-3
power switch, 1-3
preprinted paper, 3-9
prepunched paper, 3-9
precautions for moving the printer, 5-17
predominate light stripes, 4-9
preparing the printer for shipment, 5-19
pre-printed paper, 3-16, 3-27
pre-punched hole paper, 3-4
Press Match color correction, 4-4
print
adjusting color, 4-4
colors wrong, 4-10
light stripes, 4-9
smudges or smears, 4-7
Phaser® 8560 Color Printer
Index-5
Index