Xerox Phaser 8560 User Manual page 58

Printing Side Two
1. Remove the paper from the output tray and reload it in the paper tray:
Tray 1: Insert side two facedown with the top of the page entering the printer first.
■
■ Tray 2, 3, or 4: Insert side two faceup with the top of the page toward the front of the
tray.
2.
Select on the control panel:
2nd Side
Tray 1
Change setup
a. Select
the OK button.
b. Select the appropriate paper size, and
then press the OK button.
2nd Side
c. Select
OK button.
3. In he printer driver, select 2nd Side as the paper type or the appropriate tray as the paper
t
source.
, and then press
, and then press the
Phaser® 8560 Color Printer
3-28
Printing on Both Sides of the Paper
Tray 2, 3, or 4
Paper Tray Setup
a. Select
press the OK button.
Tray 2 Paper Type
b. Select either
Tray 3 Paper Type
, or
Type
(depending on the tray you are
using), and then press the OK button.
2nd Side
c. Select , and then press the
OK button.
, and then
,
Tray 4 Paper