Modena WF 1244 VGDG User Manual Book page 9

WARNING!
Use the inlet hose provided along with the appliance, your old inlet
hose may not be used. If your faucet types are not suitable as
above, replace the faucet first.
Water Faucet Connection
If your faucet has threads, the inlet hose can be
installed directly by releasing the adapter and fit
the connector the the faucet.
If your faucet do not have threads, use the
provided adapter. Release the adapter from the
inlet hose.
Use philips (+) screw to loosen the 4 (four) screws
of adapter (a). Unscrew the locking nut (b) so as
there is a 5 mm gap between the nut and adapter.
Insert adapter (a) to faucet end and tighten the 4
(four) screws. Tighten the locking nut (b).
9