Part 3: Installation Guide; Installation; Horizontal Adjustment - Modena WF 1244 VGDG User Manual Book

PART 3: INSTALLATION GUIDE

Installation

•
The appliance should not be installed in an environment below 0°C.
Do not install or place the washing machine outdoors directly
exposed to outside weather.
•
Leave some space at least 10 cm between the appliance and the
surrounding objects or wall
•
Place the appliance on a sturdy flat surface
•
Keep the appliance away from hot objects
and water splashes.
•
If there are many insects in the installation
environment,
surroundings of the washing machine
clean. The warranty does not cover any
damage caused by cockroaches or other
insects.
•
When installing the appliance, remove all
packaging and the tub support base as
shown in the picture. Failure to do so will
hinder the appliance performance
•
During first installation or first use, residual
water may come out of the appliance. This
is normal because the appliance was pre-
tested in factory

Horizontal Adjustment

•
Adjust and level the appliance to prevent noise and vibration. Install
on a sturdy flat surface (recommended place is on the corner of the
room).
• If the surface is not flat, adjust the feet
(do not insert foreign object such as a
block of wood under the feet). Ensure
that the appliance is level by using a
leveling measurement device
•
Adjust the feet until the appliance is level and lock the feet by
tightening the nut
please keep
6
the
4 (pcs) transportation bolt