Face Submenu
Use this menu to obtain the folded prints Face Up or Face Down in the
print tray.
1. Go to the "Face" submenu.
in the Numeric Control Panel
u
U3
2. The default option is shown :
in the Numeric Control Panel
u 30 1
Lower right dot
3. Use the scroll key to select the desired option and press Enter to
select it.
Select "FACE UP" [U3.01] to obtain all the folded prints oriented
face up.
Select "FACE DOWN" [U3.02] to obtain all the folded prints
oriented face down.
September 2001
in the Alphanumeric Control Panel
OPERATOR
FACE
in the Alphanumeric Control Panel
FACE UP
flashing
Selecting "DON'T CARE" [U3.03] tells the folder to accept every
print with all possible title block locations and orientations
LEF/SEF. With this selection the output orientation could be either
Face Up or Face Down.
4. Select EXIT [ u3.00 ] to rise one level.
5. Turn off the folder and then switch it on to activate the
modification.
Face
Face
down
Don't
care
Exit
88XX Series Folder Operator Manual 20
u 3
u 3.01
u 3.02
u 3.03
u 3.00