Table of Contents
Advertisement
You can also create your own test files by entering a test file
name and then pressing the
Store File
key. When you press
the |Store File] key, a test file will be created which contains
the current contents of each of the five parameter entry
menus.
2. Press
Done
once to return to the Measurement
again to return
Definition Menu, and then press
to the Main Software Level.
Done
If you now wish to make a noise measurement using a
device of your own, refer to the remaining chapters in this
manual.
You will find that Chapters 2 through 6 provide detailed
procedures and recommendations for measuring your signal
source and two-port devices.
Getting Started
1-23
Advertisement
Table of Contents
