Headlight Aiming Adjustment - Hyundai TUCSON Owner's Manual

Hide thumbs Also See for TUCSON:
Table of Contents

Advertisement

G300B01JM
2. Loosen the drain plug at the bot-
tom of the fuel filter.
3. Tighten the drain plug when water
no longer comes out.
4. Installation is the reverse order of
the disassembly.
5. Check to be sure that the warning
lamp illuminates when the ignition
key is turned to 'ON', and that it
goes off when the engine is started.
If in doubt, consult your nearest
authorized HYUNDAI dealer.
NOTE:
It is recommended that water ac-
cumulated in the fuel filter should
be removed by an authorized
Hyundai dealer.
!
WARNING:
Be sure to carefully wipe away any
water drained out in this manner,
because the fuel mixed in the wa-
ter might be ignited and result in a
fire.
DO-IT-YOURSELF MAINTENANCE
HEADLIGHT AIMING
ADJUSTMENT
G290A02O-GAT
Before performing aiming adjustment,
make sure of the following.
1. Keep all tires inflated to the correct
pressure.
2. Place the vehicle on level ground
and press the front bumper & rear
bumper down several times. Place
vehicle at a distance of 3,000 mm
(118 in.) from the test wall.
3. See that the vehicle is unloaded
(except for full levels of coolant,
engine oil and fuel, and spare tire,
jack, and tools). Have the driver or
equivalent weight placed in driver's
seat.
4. Clean the head light lenses and
turn on the headlights (low beam).
6
33

Advertisement

Table of Contents
loading

Table of Contents