Hyundai TUCSON Owner's Manual page 38

1
FEATURES OF YOUR HYUNDAI
26
B170A04A-AAT
HEIGHT ADJUSTABLE FRONT
SEAT SHOULDER BELT
HJM2050
You can adjust the height of the shoul-
der belt anchor to one of the 4 positions
for maximum comfort and safety.
If the height of the adjusting seat belt is
too near your neck, you will not be
getting the most effective protection.
The shoulder portion should be ad-
justed so that it lies across your chest
and midway over your shoulder near-
est the door and not your neck.
To adjust the height of the seat belt
anchor, lower or raise the height ad-
juster into an appropriate position. To
raise the height adjuster, pull it up. To
lower it, push it down while pressing
the height adjuster button.
Release the button to lock the anchor
into position. Try sliding the height
adjuster to make sure that it has locked
into the position.
!
WARNING:
o The height adjuster must be in
the locked position when the
vehicle is moving.
o The misadjustment of height of
the shoulder belt could reduce
the effectiveness of the seat belt
in a crash.
B180A02A-GAT
SEAT BELTS 3-Point System
with Webbing Clamp Locking
Retractor (If installed)
To Fasten Your Belt
B180A01L
To fasten your seat belt, pull it out of the
retractor and insert the metal tab into
the buckle. There will be an audible
"click" when the tab locks into the
buckle.
The seat belt automatically adjusts to
the proper length only after the lap belt
is adjusted manually so that it fits
snugly around your hips. If you lean
forward in a slow, easy motion, the belt
will extend and let you move around. If
there is a sudden stop or impact, how-
ever, the belt will lock into position.