Power Steering Fluid Level; Headlight Aiming Adjustment - Hyundai Tiburon Owner's Manual

Operation maintenance specifications
Hide thumbs Also See for Tiburon:
Table of Contents

Advertisement

6
DO-IT-YOURSELF MAINTENANCE

POWER STEERING FLUID LEVEL

26
G230A03A-AAT
The power steering fluid level should be checked
regularly. To check the power steering fluid
level, be sure the engine is "OFF", then check
to make certain that the power steering fluid
level is between the "MAX" and "MIN" level
markings on the fluid reservoir.
NOTE:
Grinding noise from the power steering
pump may be heard immediately after the
engine is started in extremely cold condi-
tions (below - 4°F). If the noise stops during
warm up, there is no abnormal function in
the system. It is due to a power steering
fluid characteristic in extremely cold condi-
tions.
Recommended Fluid
Use PSF-3 type fluid
NOTE:
Do not start the engine when the power
steering oil reservoir is empty.
G240A01A-AAT
POWER STEERING HOSES
It is suggested that you check the power steer-
ing hose connections for fluid leakage at regular
intervals. The power steering hoses should be
HGK5011
replaced if there is severe surface cracking,
scuffing or worn spots. Deterioration of the hose
could cause premature failure.

HEADLIGHT AIMING ADJUSTMENT

G290A03GK-AAT
Low Beam
Vertical aiming
G290A03GK
High Beam
Vertical aiming
G290A04GK
Before performing aiming adjustment, make
sure of the following.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents