Lps Space And Delivery Requirements - Xerox 4050 Installation Planning

Week Tasks
Installation Ensure that supplies are available.
Install the LPS.
Have systems specialist on hand.
Install the primary application.
Have test jobs available, if desired.
Have operators available for training.
Train operators.
Check the documentation kit.
Review preventive maintenance schedules and
service call procedures.
Post-
installation Provide ongoing system maintenance.
Establish supply and maintenance procedures.
Identify additional applications.
Order additional fonts and documentation.

LPS space and delivery requirements

XEROX 4050/4090/4450/4650 LPS INSTALLATION PLANNING
Table 1-3. Installation planning checklist (continued)
Reference
Chapter 2
Chapter 3
Chapter 3
Chapter 3
Dimensions and weights of the LPS system controller and printer
are listed in this chapter, along with diagrams to help you
visualize their sizes and total space requirements.
Note: There must be a 78 inch/1,981.2 mm vertical clearance
throughout the entire area. In addition, your LPS must be
installed in a fixed location with a minimum clearance space of
36 inches/914 mm around all sides of each piece of equipment
for access by Xerox service representatives.
Space planning templates, a space planning template
transparency, and a grid are provided at the end of this chapter
to assist you in planning the placement of your LPS. Contact
your service representative if you have questions not specifically
addressed in this guide.
The following diagrams represent top views of the components,
surrounded by the required 36-inch/914 mm clearance on all
sides.
PREINSTALLATION
Date
Responsibility completed
Customer
Xerox
Customer
Customer/Xerox
Customer
Customer
Xerox
Customer
Xerox
Customer
Customer
Customer/Xerox
Customer
1-5