Xerox 4050 Installation Planning page 13

System controller with 9-track
magnetic tape drive dimensions
XEROX 4050/4090/4450/4650 LPS INSTALLATION PLANNING
The 9-track magnetic tape drive sits on top of the 4050, 4090,
4450, or 4650 system controller and has no additional width or
depth requirements.
Its height and weight, however, may be important
considerations. When calculating the 78-inch/1,981 mm height
clearance for the system controller, make sure you add 32.5
inches/825 mm for the 9-track magnetic tape drive.
Note: When viewed from the front, the magnetic tape drive is
positioned on the top of the right half of the 4050 system
controller and on the top of the left half of the 4090/4650 system
controller.
Its weight should also be factored into the LPS total weight.
Dimensions of the 4050/4090/4650 system controller with the 9-
track magnetic tape drive measurements are shown in table 1-5.
Table 1-5. Dimensions
Width:
Depth:
Height:
Weight: System controller:
9-track magnetic tape drive:
PREINSTALLATION
24 inches/609 mm
23 inches/584 mm
73.5 inches/1,866 mm
430 pounds/195 kg
196 pounds/88.9 kg
1-7