Safety Notes - Xerox WorkCentre Pro 412 Quick Start Manual

Safety Notes

Your Xerox product and supplies have been designed
and tested to meet strict safety requirements. These
include Safety Agency approval, and compliance to
established environmental standards. Please read the
following instructions carefully before operating the
product and refer to them as needed to ensure the
continued safe operation of your product.
The safety testing and performance of this product
have been verified using XEROX materials only.
Follow all warnings and instructions marked on, or
supplied with the product.
This WARNING Mark alerts users to the possibility of
personal injury.
This WARNING Mark alerts users to heated surfaces.
WARNING: This product must be connected to a
protective earthing circuit.
This product is equipped with a 3-wire type plug,
provided with a protective earthing pin. This plug will fit
only into an earthed power outlet. This is a safety
feature. To avoid risk of electric shock, contact your
electrician to replace the receptacle if you are unable
to insert the plug into the outlet. Never use an earthed
adapter plug to connect the product to a power source
receptacle that lacks an earth connection terminal.
This product should be operated from the type of
power source indicated on the marking label. If you are
not sure of the type of power available, consult your
local power company.
Do not allow anything to rest on the power cord. Do
not locate the product where persons will step or trip
on the cord.
Page 14