Table of Contents
Advertisement
Drive Housing Replacement
CAUTION
Do not drop gear cluster (7) when removing drive
housing (10). Gear cluster may stay engaged in
motor front end bell or drive housing.
Disassembly
1.
Relieve pressure; page 6.
2. Remove pump (13); Displacement Pump Re-
placement, page 23.
3. Fig. 9. Remove two screws (18a).Tip sprayer up.
Remove two screws (18b) and remove shroud
(74).
4. Remove two front screws (22).
18a
18b
Fig. 9
74
1
22
7
ti5915a
5. Remove two back screws (22).
6. Pull drive housing (10) off of motor (1).
Assembly
1. Push drive housing (10) onto motor (1)
2. Install two front screws (22).
3. Install two back screws (22).
4. Fig. 9. Install shroud (74) with two screw (18a).Tip
sprayer up. Install two screws (18b).
5. Install pump (13); Displacement Pump Replace-
ment, page 23.
6. Install new access cover (10a) with two screws
(10b).
10
10a
10b
22
18b
21
309063
Advertisement
Table of Contents
