olympia electronics BSR-6155 Quick Start Manual

Loop ΙΝ
-R
Remote LED connection
Figure 1
BSR-5072
Loop
-L +L -LF +LF
Connect the power cables (minding the correct polarity) according to the requirements of
the installation. (Figure 1)
CONNECTION
1. + IN/OUT : Connect to (+L) of the loop.
2. - IN : Connect to (iL) of the loop.
3. - OUT : Connect to (-L) of the loop.
4. - R : External LED connection
5. : Connected to the cable's shield (when shield is used).
3
Place the detector carefully so that the side marks are aligned and rotate the detector
clockwise until it locks. Provide power to the device and after 3-5 seconds it is ready for
operation.
4
Accessories
921612400 BASE-6124/SB Base for addressable detector with siren and beacon
921196000 BASE-196/N Waterproof base
921615500, 921615700, 921616000_09_004
4
Technical Characteristics
TYPE
Loop OUT
MAIN VOLTAGE
STANDBY CONSUMPTION
ALARM CONSUMPTION
SMOKE CONCENTRATION SENSITIVITY
TEMPERATURE SENSITIVITY
CLASS
INDICATORS
OUTPUT
COMMUNICATION PROTOCOL
MAX. LOOP CURRENT (lc max, -L in/out)
MAX. SWITCH CURRENT (ls max, -L in/out)
MAX. SERIES RESISTANCE (Zc max, -L in/out)
MAX. LEAKAGE CURRENT IN ISOLATION MODE (l max, -L in/out)
ISOLATION VOLTAGE (Vso min-max)
RECONNECT VOLTAGE (Vso min-max)
DEGREES OF COVER PROTECTION
OPERATING TEMPERATURE RANGE
RELATIVE HUMIDITY
CONSTRUCTION MATERIALS
CONSTRUCTION COLOR
EXTERNAL DIMENSIONS ( diameter x height )
TYPICAL WEIGHT
GUARANTEE
BSR-6155
Analogue addressable optical smoke detector
with integrated isolator
EN 54-7:2018, EN 54-17:2005/AC:2007
DoP: 921615500_59_003
BSR-6157
Analogue Addressable optical smoke & rate-of-rise
heat detector with integrated isolator
ΕΝ 54-5:2017+Α1:2018 , ΕΝ 54-7:2018,
EN 54-17:2005/AC:2007
DoP: 921615700_59_002
BSR-6160
Analogue addressable rate-of-rise heat detector
with integrated isolator
EN 54-5:2017+A1:2018, EN 54-17:2005/AC:2007
DoP: 921616000_59_002
Warranty
Olympia Electronics guarantees the quality, condition and operation of the goods. The period of warranty is specified in
the official catalogue of Olympia Electronics and also in the technical leaflet, which accompanies each product. This
warranty ceases to exist if the buyer does not follow the technical instructions included in official documents given by
Olympia Electronics or if the buyer modifies the goods provided or has any repairs or re-setting done by a third party,
unless Olympia Electronics has fully agreed to them in writing. Products that have been damaged can be returned to the
premises of our company for repair or replacement, as long as the warranty period is valid.
Olympia Electronics reserves the right to repair or to replace the returned goods and to or not charge the buyer
depending on the reason of defection. Olympia Electronics reserves the right to charge or not the buyer the
transportation cost.
P.C. 60300 P.O. Box 06 Εginio Pierias Greece
5
BSR-6155 BSR-6157 BSR-6160
BSR-6155/C BSR-6157/C BSR-6160/C
Addressable Addressable optical Addressable
optical smoke & rate-of-rise rate-of-rise
smoke detector heat detector heat detector
12-30V DC
195μΑ
2.5mA (with activated on board LED)
Adjustable Adjustable
from 0.107 to 0.300 from 0.107 to 0.300
in 0.010db/m steps in 0.010db/m steps
Adjustable
Adjustable
- from 57 to 90
from 57 C to 120 C
ο
in 1.5 C steps
- A1R/A1S A1R/A1S/CS (adjustable)
Alarm LED
Remote LED driver
Olympia A Protocol
1A
5A
300mΩ
25mA pulses (6ms duration every 2 sec)
L
8.8 - 11
10.2 - 13
IP42
ο
-40 to 70 C
Up to 95%
ABS/PC
WHITE ANTHRACITE (/C)
103 x 48mm 103 x 55mm 103 x 48mm
160 gr. 160 gr.
2 years
20
1293
21
1293 72nd km. O.N.R.
Thessaloniki-Katerini
P.C. 60300 P.O. Box 06
Εginio Pierias Greece
21
1293
72nd km. O.N.R. Thessaloniki-Katerini
www.olympia-electronics.com
info@olympia-electronics.gr
921615500, 921615700, 921616000_09_004
European
manufacturers
90μΑ
-
ο ο
145 gr.
ANALOGUE ADDRESSABLE
SMOKE & RATE OR RISE HEAT DETECTORS
WITH INTEGRATED ISOLATOR
Thank you for your trust in our products
Olympia Electronics - European manufacturer