Locating The Serial Number; Further Assistance - Xerox WorkCentre 3550 Quick Use Manual

Xerox workcentre 3550: user guide
Hide thumbs Also See for WorkCentre 3550:
Table of Contents

Advertisement

Lift the Document Feeder. Remove any
paper from the feed area by carefully
pulling it to the right using both hands.
Close the Document Feeder.
For further information about jam clearance and troubleshooting, refer to the
User
Guide.

Further Assistance

For any additional help visit our customer web site at
contact the Xerox Support Center quoting the machine serial number.
Xerox Support Center
If a fault cannot be resolved by following the display instructions, check the
Troubleshooting
section of the
quickly. If the problem persists, contact the Xerox Support Center. The Xerox
Support Center will want to know the nature of the problem, the machine serial
number, the fault code (if any) plus the name and location of your company.

Locating the Serial Number

Locate the machine's serial number by taking the following steps:
1.
Press Machine Status on the control panel.
2.
Press the up/down arrows to highlight Machine Information and press
OK.
3.
Press the up/down arrows to highlight Serial Number and write down
your machine's serial number.
4.
Press Stop to return to ready mode.
The serial number is also located on the inside of the front door on the
machine.
User
Guide. It may help to solve the problem
Xerox WorkCentre 3550
English
www.xerox.com
or
Quick Use Guide
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents