Miller Maxstar 300 LX Owner's Manual page 44

C. Reconfiguring RMT 2T HOLD For 2T, 3T, Spot, 4T, 4T Momentary, Or Mini Logic Control
1
For RMT STD (Remote Standard), RMT
2T Hold (Remote 2T Hold), and On trig-
ger operation, see Section 6-2A, B, and
I.
1 Process Switch Pad
2 Output Switch Pad
3 Power Switch
OM-2222 Page 38
SEL
2
And
To access the RMT 2T HOLD, turn pow-
er switch on, press and hold the Process
and Output switch pads before the soft-
ware version clears the meters and [SEL]
appears. RMT 2T Hold LED will light.
4 Encoder Control (Set Value)
5 Ammeter (Displays Value)
H-2 = 2T (see Section 6-2B)
SPO = Spot (see Section 6-2H
4
5
H−2
Or
V
Rear Panel
H-4 = 4T (DX, LX and CE models) (see
Section 6-2E)
H4L = Mini Logic (DX, LX and CE models)
(see Section 6-2F)
H4E = 4T Momentary (DX, LX and CE
models) (see Section 6-2G).
H-3 = 3T (see Section 6-2D).
Press torch trigger or turn power Off to
save setting.
Or Or
3