Table of Contents
Advertisement
Application Guide
Reset to default factory settings
Press
and
simultaneously for at least 3 seconds to reset Danfoss Icon™ Display to the
default factory settings. The display toggles between
Menus
Wake up the thermostat. Press
the User menus
. Choose menu with . (To open the Installer menus
and
, press
Temperature limitation
and
toggles with the temperature on the screen. Set highest temperature with
and
toggles with the temperature on the screen. Set lowest temperature with
Con rm your choice with .
Default temperature range: 5 to 35° C.
Product ID
Production code.
Menu 3 and 4 are only relevant for the installer
Set actuator type
Choose between Normally Closed
Con rm with .
Set heat emission characteristics of the oor
Choose Fast
Con rm with .
AB440847594423en-000103
Heating Control Danfoss Ally™
for 3 seconds to open
and
. Toggle the menus with
again for 3 seconds)
Medium
or Slow
and
or
or Normally Open
heat emission characteristics with
. Con rm by touching
with
or
.
© Danfoss | FEC | 2023.12 |
or
.
or
.
or
.
17
Advertisement
Table of Contents
